Re: Disable Automated Floating Pool and Power on Policy
If you shut down the Connection Servers the VMs will also not be powered on. If you are bringing the entire environment down just bring down the CS cluster and View Composer first and then no View...
View ArticleRe: Re-Using the same tile VMs for iterative testing - is this supported?...
regular ping - what is the syntax for a staf ping. I see it also says to make sure the staf process is running. How would I check that and if it is not running, how do I start it?
View ArticleRe: Service starts and then stops during SRM 5.1.1 install
Hi, You must create 64-bit DSN for SRM 5.1. Michael.
View ArticleClik here to view.
Re: ESXi 5.1 U1 - Primergy RX200S4, Raid0 issue - VD not detected properly
Got it... I learned that ESXi does not support software RAID. There isn't any other way to make it work? Raid 0 would have been really nice for a VMware home lab...
View ArticleRe: Trouble getting into VM using RDP with a NAT connection
I was able to RDP into a Windows Guest successfully via NAT in my lab. Could you please check the Firewall in your WinSer2008R2 VM and also check if RDP is enabled in the Guest OS?
View ArticleVSphere Installation Question
Hi All,I am in the process of building the following server:Case: Fractal Design Define R4 ATX Tower Case Black PearlPower Supply: Corsair Professional Series HX750 750W ATX Fully Modular 80PLUS Gold...
View ArticleRe: Can't see shared folders in Linux Guest (Windows Host)
However, drag and drop still doesn't appear to be working. In the current build I have based on VMwareTools-9.2.2-893683.tar.gz I can DnD from Linux Mint 15 to the Host but not from the Host to the...
View ArticleRe: Re-Using the same tile VMs for iterative testing - is this supported?...
The command would be "staf OlioDB0 ping ping" from a windows command prompt.You can look in the task manager for STAFproc.exe.If it isn't running, you can log into your DS2DB0 via ssh and execute the...
View ArticleRe: VMware Ethernet with Cisco EtherChannel and Trunking Question
Thanks you two. It's odd. When I tried setting some of the interfaces into trunk mode it said I couldn't if the encapsulation was in auto mode. Those few interfaces only let me set it in trunk mode...
View ArticleClik here to view.
Re: Need assistance in choosing between Vsphere ICM 5.1 and Vsphere FT
How much knowledge or how much experience do you need to have in networking/storage for these courses? Currently we are a smaller office, running netapp storage, juniper L3 switches with only a...
View ArticleRe: Trouble getting into VM using RDP with a NAT connection
Thank you for your reply JSen, Remote desktop is enabled, and I had turned off windows firewall on both the guest and the host server in hopes that it would solve the problem. The host server is...
View ArticleRe: Separate dvSwitches for traffic types or use NetworkIO Control with port...
Thanks HeathReynolds. We did realize one limitation. We planned on using 15 ports (5 per host), but etherchannel only supports 2 to 8. Since we're not on 10Gig yet, we had to limit it to 3, 3, and 2 on...
View ArticleRe: Need assistance in choosing between Vsphere ICM 5.1 and Vsphere FT
It helps but not required. A basic understanding of how networking works (OSI model, TCP/IP, etc.) and basics of shared storage concepts (the idea of LUNs, arrays, etc.) is really what you need. The...
View ArticleRe: Malfunctioned Volume
Migrations are based off the USMT features and can be used to "migrate" domains. It may take some custom scripting on your part to get this to work, but it could work.
View ArticleRe: vmrun quits after logout even when run as root
VMware does not officially support running a Virtual Machine in this manner under VMware Fusion.
View ArticleRe: Create Hardware Report
when I tried to do a search of the db for these fields I did not come up with anything. I did come up with the other common ones listed in the CVD properties but nothing else.
View ArticleRe: vmrun quits after logout even when run as root
that's ok, I'm interested in supported and unsupported solutions.
View ArticleRe: Can't see shared folders in Linux Guest (Windows Host)
Thanks WoodyZ. Same for me... guest to host is ok... host to guest isn't. No biggie... but if you get it working let me know. Thanks
View ArticleRe: Create Hardware Report
Sehr geehrte Damen und Herren, ich bin bis einschließlich 15.07.2013 nicht im Haus und habe in diesem Zeitraum nur eingeschränkten Zugriff auf meine E-Mails. In dringenden Fällen wenden Sie sich bitte...
View ArticleRe: Port mirroring available with vswitch or only dvswitch?
So the ESXi side is completely unaware of the mirroring in your setup? In that case it should not make any difference whether you use a standard or distributed vSwitch. The forwarding logic is exactly...
View Article